 Clutch Puller for Arctic Cat 96-05 (all models except '96 EXT580, ZR580 and Wildcat). Threads: 9/16"-18
Used to Pull a Clutch on Makes/Models:
Puma 94-96, Arctic Cat 96-05 (all models except '96 EXT580, ZR580 and Wildcat) Replaces No. 0644-207 |
More info ›› |
|
|
|
Arctic Cat 2007-09 Z1 and other 1000cc models.
Replaces No. 0644-523, 0744-052, 0744-062. Threads: 14mm x 12" |
More info ›› |
|
|
 Clutch Puller for Arctic Cat Comet 108C Clutches. Threads: 7/8"-14
Pulls Clutches for Make/Models:
Cheetah 1991-94, Cougar/Mountain Cat/2-up 1991-95, El Tigre EXT/Mountain Cat 1990-91, EXT/EFI/Mountain Cat/Special/550/580/580Z 1991-95, Jag 1993-95, Pantera 1990-95. Panther 1993-95, Prowler/Mountain Cat/2-up/Special 1990-94, Thundercat 1992-95, Wildcat/Mountain Cat/EFI 1991-96, Z/ZR, ZRT 1994-95
ZR580 1996 w/short internal mounting bolt
Replaces No. 0644-096 |
More info ›› |
|
|
 Clutch Puller for All Arctic Cat with Hex Shaft Clutches. Comet 94 Duster - Old Style, Power Bloc with 9/16" threads, Salsbury model 800 & 780 new style, Rupp, Mercury & Sno-Jet & Kawasaki using Arctic Cat hex clutches. Threads: 9/16"-18 |
More info ›› |
|
|
 Clutch Puller for Arctic Cat Comet 108C. Threads: 3/4"x16
Cheetah 1989-90, Cougar/Mountain Cat 1989-90, El Tigre EXT 1989, El Tigre 6000 1989, Jag/Deluxe/Special/Mountain Cat 1991-92, Jag AFS/AFS Deluxe/Super 1989-92, Lynx/Mountain Cat 1992, Pantera 1989, Panther/Deluxe/Mountain Cat 1989-92, Wildcat 650 1989 with long internal mounting bolt
Replaces No. 0644-100 |
More info ›› |
|
|
 Clutch Puller for Comet 108EXP and 4-Pro Models with 5/8"-18 Thread.
Pulls Comet Clutch Model Nos:
217104A, 217107A, 217204A, 217207A, 217500A, 217503A, 217504A, 217507A, 217600A, 217604A, 217607A, 219500A, 219503A, 219507A,219703A,219903A
Caution: Customers must make sure that the puller being used for these clutches is a 5/18", not 9/16"-18 to prevent damage to the clutch and or puller.
Caution: The 217336A puller is not to be used to pull a Comet clutch off of a Polaris. That clutch uses |
More info ›› |
|
|
 Clutch Puller for Comet 108EXP and 4-Pro with 5/8"-18 Thread, .310" end.
Pulls Comet Clutch Models:
217503A, 217600A used on Polaris with 7/16" clutch bolt
Caution: The 217500A should not be used for any other application or in place of No. 217336A. |
More info ›› |
|
|
 Comet Clutch Puller for 100C, 102C, 108C & 108EXP Clutches. (Original Comet Puller) Threads: 3/4"-16 |
More info ›› |
|
|
 2 pc. Clutch Puller pulls Comet 102C & 108C Clutches (except OEM Yamaha and #212215). Threads: 3/4"-16 |
More info ›› |
|
|
 Clutch Puller for Comet 108EXP and 4-Pro models with 9/16"-18 Thread.
Pulls Comet lutch model nos.
217100A
217101A
217102A
217103A
217105A
217106A
217200A
217205A
217501A
217502A
217505A
217506A
217605A
Note: Some 108EXP and 4-Pro models must be tapped deeper in order to use this puller. Use part no. 91618TAP. Threads: 9/16"-18
Caution: Some 108EXP and 4-Pro models were not tapped deep enough and must be tapped deeper. Make sure the puller hits the bottom of the crank before |
More info ›› |
|
|
 POLARIS: Pulls clutch used on 550 FC Case Reed Fuji engines 1999-00. Indy Trail RMK 1999-01, Sport Touring 2000-01, Super Sport 550 1999-01. Threads: 3/4"-16. |
More info ›› |
|
|
 POLARIS: Pulls clutch used on 600 and 700 Domestic Twins engines. Indy 600 RMK 1998-99, Indy 700 RMK 1997-99, Indy 700 SKS 1997, 1999, XC 600 1998-99, XC 600 SP 1999, XC 700 1998-99, XC 700 SP 1999. Threads: 14mm - 1.5mm. |
More info ›› |
|
|
 POLARIS: Pulls clutch used on Domestic twin engines 2003-04 and triple 1999-04. All model 2005-2009. Including 4-strokes 2006-09, Classic 700 2001-04, Classic Touring 600 2001-03, Indy 500/600/700/800RMK 2000-04, Indy 600 Touring 2000, Indy 700 SKS 2000-01, Pro X 2001-04, XC 440 Edge 1999-00, XC 500 2000-01, XC 500/600/700 SP 2000-04, XC 600/700 DLX 2000, XCR 700 1999, XCR 800 2000-03. Replaces No. 2872085, 2875567 |
More info ›› |
|
|
 POLARIS: Clutch Puller for 1975-08 Most Models, ATV Most Models. 3/4"-16 Thread. OEM 2870506
Pusher Pin 3" long. |
More info ›› |
|
|
 POLARIS: P85-P90 models 72-95, Indy 1994-97 Fuji Engines 98-01 (except deep bore clutch and models listed below) & COMET 102C, 108C & 108EXP. Replaces No. 2870506. Thread: 3/4"-16. |
More info ›› |
|
|
 SKI-DOO: T.R.A. (Total Range Adjustable) clutch. Fits Alpine 1989-95, Escapade 1987-89, Formula 500/583 1997-00, Formula MX 1986-95, Formula Plus 1986-93, Formula S/SL/SLS 1995-00, Formula ST/STX 1994-97, Formula Z 500/583 1994-00, Grand Touring 1993-98, Mach I 1990-94, MXZ 440/580 1995-01, MXZ 670 1996, 98, Safari 1990-97, Skandic 1992-00, Stratos 1987-88, Summit 470/583 1994-98, Touring 1992-00. Replaces No. 420.4760.30 and 529.0079.00. Threads: 14mm x 1mm. |
More info ›› |
|
|
 SKI-DOO: Hi Performance clutch 1975-85 with square shaft. POLARIS 1971 and earlier models with steel clutches. Replaces No. 529.0021.00 and 860.4141.00. Thread: 5/8"-18. |
More info ›› |
|
|
 SKI-DOO: Used on most liquid cooled engine 1995-03. Formula III 1995-00, Formula SS 1995-97, Formula Z 670 1998-99, Grand Touring 500/700 1999-00, Grand Touring SE 670 1994-99, Mach I 1993-00, Mach Z 1993-03, MXZ 380/550 FC 2003-05, MXZ 500/600 1998-03, MXZ 670 1997, 1999-00, Summit 500/600 1999-01, Summit 670 1995-99. Replaces No. 529.0224.00. Threads: 14mm x 1.5mm |
More info ›› |
|
|
|
SKI-DOO: Citation 1980-84, 1986-87; Formula SP 1986, Nordik 1982-83, Safari GL 1986, Safari 377/E 1987, Skandic R/503 1982-87, Tundra/LT 1986-87.
MOTO-SKI: Mirage 1980-83. Replaces No. 860-4142-00.
Threads: 16mm x 2mm. This is a 1 pc. Puller |
More info ›› |
|
|
 SKI-DOO: Citation 1980-84, 1986-87; Formula SP 1986, Nordik 1982-83, Safari GL 1986, Safari 377/E 1987, Skandic R/503 1982-87, Tundra/LT 1986-87.
MOTO-SKI: Mirage 1980-83. Replaces No. 860-4142-00.
Threads: 16mm x 2mm |
More info ›› |
|
|
